tapered roller bearings

Contact Now

The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, with no sliding motion between the raceways and the OD of the rollers.

This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.

The rollers are stabilized and restrained by a flange on the inner ring, against which their large end slides, which stops the rollers from popping out due to the "pumpkin seed effect" of their conical shape.The larger the half angles of these cones the larger the axial force that the bearing can sustain.

NTN T-HM237546D/HM237510+A tapered roller bearings

CONV-504-3 CONV-504-3
S4125 3.1250 in

236,538 mm x 320,675 mm x 44,45 mm Timken 88931/88126 tapered roller bearings

1.50 mm One Shield
55.000 mm 100.0000 mm

73.817 mm x 112.712 mm x 25.400 mm NACHI 29688/29620 tapered roller bearings

3800 kN 450 r/min
7500 kN 0.3

Timken 480/472D+X2S-480 tapered roller bearings

257.175 mm 30.163 mm
107 kN 64 kg

NTN CRD-8048 tapered roller bearings

13000 N 1.00 mm
10000 rpm 6700 N

Fersa 33016F tapered roller bearings

490000 N 260.0000 mm
170.000 mm 1.00 mm

50 mm x 110 mm x 27 mm SNR 30310A tapered roller bearings

128.5 mm 166 N/µm
32.9 mm 1

Toyana 744/742 tapered roller bearings

440 mm HMV 88E
M 8 90 mm

60 mm x 168 mm x 102 mm FAG 201084 tapered roller bearings

69 mm 26 mm
7 mm M 24x50

40 mm x 80 mm x 23 mm KBC 32208J tapered roller bearings

30.000 mm 5000 rpm
78000 N 90.0000 mm
1/18